APPLICATION
- This clamp is applied to the end of the grid and at angles less than 90 degrees. For this purpose, tension clamp is used with a pigtail bolt at the end stand.
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Cross section of aerial bundled cable’s messenger | 25- 50 mm2 |
| Max. breaking load | 15 KN |
| PARTS AND COMPONENTS | |
|---|---|
| Body | UV resistant fibre reinforced polyamide |
| Wedge | Including two tongue and groove parts which slides within the body and is made of UV resistant fiber reinforced polyamide |
| Wire rope or wire | Made of galvanized steel which has a very high tensile strength. The wire rope is secured to the dead end clamp body by rivets. Also, the plastic protector is located in the center of the wire rope arc, so that it can give more lifetime and strength to the clamp at the connection point of the wire rope to the pigtail bolt hook.
The wire is made of hot-dip galvanized steel with a length of approximately 70 cm Its connection to the clamp is plated with bolts and nuts to the clamp. |
INSTALLATION METHOD
First, pull the clamp wedges out from inside the body so that the relevant messenger can be inserted inside. Then push the wedges back into the body. Pass the wire rope or wire inside the pigtail bolt hook and the assembly is completed.
One of the advantages of this clamp is that there is no need of tools for the installation worker.
PACKAGING
15 PCS/CTN
Reviews
There are no reviews yet.